Advanced Water Treatment of PAC Polymer 30%/Polyaluminum Chloride for Power Plant Water Treatment

Description:

1. Anionic polyacrylamide Emulsion is a water based polymer.
2. Anionic Polyacrylamide has a big range of high molecular weight from 16-25 million, with an anionic charge density ranging from 10-60%.
3. Anionic polyacrylamide Emulsion grade has high molecular weight, and medium charge degree.
4. It is most often used to increase the viscosity of water (creating a thicker solution) or to encourage flocculation of particles present in water.
5. Due to the polar groups on the molecular chain containing a certain amount, it can through the adsorption of solid particles suspended in water, bridging between particles or through the charge and make the particle formation of large flocs condensation. So, it can accelerate the settlement of particles in suspension, have obvious to speed up the solution to clarify, promote filtering and other effects.

Using

1. When use solid product, make 5-10% solution first, then dilute to request concentration; during the dissolution, add the water and mix slowly, the diluted solution should be used up in 24 hours to avoid hydrolysis and reduce the effect. The dose quantity of this product is based on water resource haziness and purifies facility, the coagulating sedimentation test is needed to ensure the best dosing quantity. 
2. Use the polyethylene plastic barrel to store liquid Poly-aluminium Chloride, the net weight of each barrel is 25kg, 50kg or 200kg. And covered with double cover, fasten the inner cover, screw the outer cover. The liquid Poly-aluminium Chloride can also be transferred by tank vehicle. The solid Poly-aluminium Chloride is packed by double bag, the net weight of each bag is 25kg, inner bag is plastic bag, and outer bag is plastic basket bag. The product should be stored in dry, airy warehouse and avoid drench and breathing.